First run a quick test to make sure the “sendmail” application is
installed and working correctly. Execute the following command,
replacing “you@youremailid.com” with your e-mail address.
# mail -s “Hello world” you@youremailid.com
Hit the return key and you will come to a new line. Enter the text “This is a test from my server”. Follow up the text by hitting the return key again. Then hit the key combination of Control+D to continue. The command prompt will ask you if you want to mark a copy of the mail to any other address, hit Control+D again. Check your mailbox. This command will send out a mail to the email id mentioned with the subject, “Hello world”.
To add content to the body of the mail while running the command you can use the following options. If you want to add text on your own:
# echo “This will go into the body of the mail.” | mail -s “Hello world” you@youremailid.com
And if you want mail to read the content from a file:
# mail -s “Hello world” you@youremailid.com < /home/calvin/application.log
Some other useful options in the mail command are:
-s subject (The subject of the mail)
-c email-address (Mark a copy to this “email-address”, or CC)
-b email-address (Mark a blind carbon copy to this “email-address”, or BCC)
Here’s how you might use these options:
# echo “Welcome to the world of Calvin n Hobbes” | mail -s “Hello world” calvin@cnh.com -c hobbes@cnh.com -b susie.derkins@cnh.com
# echo “Sending an attachment.” | mutt -a backup.zip -s “attachment” calvin@cnh.com
This command will send a mail to calvin@cnh.com with the subject (-s) “attachment”, the body text “Sending an attachment.”, containing the attachment (-a) backup.zip. Like with the mail command you can use the “-c” option to mark a copy to another mail id.
Read more at http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/#ZW60emwX4KkihuKF.99
MAIL# mail -s “Hello world” you@youremailid.com
Hit the return key and you will come to a new line. Enter the text “This is a test from my server”. Follow up the text by hitting the return key again. Then hit the key combination of Control+D to continue. The command prompt will ask you if you want to mark a copy of the mail to any other address, hit Control+D again. Check your mailbox. This command will send out a mail to the email id mentioned with the subject, “Hello world”.
To add content to the body of the mail while running the command you can use the following options. If you want to add text on your own:
# echo “This will go into the body of the mail.” | mail -s “Hello world” you@youremailid.com
And if you want mail to read the content from a file:
# mail -s “Hello world” you@youremailid.com < /home/calvin/application.log
Some other useful options in the mail command are:
-s subject (The subject of the mail)
-c email-address (Mark a copy to this “email-address”, or CC)
-b email-address (Mark a blind carbon copy to this “email-address”, or BCC)
Here’s how you might use these options:
# echo “Welcome to the world of Calvin n Hobbes” | mail -s “Hello world” calvin@cnh.com -c hobbes@cnh.com -b susie.derkins@cnh.com
MUTT
One of major drawbacks of using the mail command is that it does not support the sending of attachments. mutt, on the other hand, does support it. I’ve found this feature particularly useful for scripts that generate non-textual reports or backups which are relatively small in size which I’d like to backup elsewhere. Of course, mutt allows you to do a lot more than just send attachments. It is a much more complete command line mail client than the “mail” command. Right now we’ll just explore the basic stuff we might need often. Here’s how you would attach a file to a mail:# echo “Sending an attachment.” | mutt -a backup.zip -s “attachment” calvin@cnh.com
This command will send a mail to calvin@cnh.com with the subject (-s) “attachment”, the body text “Sending an attachment.”, containing the attachment (-a) backup.zip. Like with the mail command you can use the “-c” option to mark a copy to another mail id.
Read more at http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/#ZW60emwX4KkihuKF.99
First run a quick test to make sure the “sendmail” application is installed and working correctly. Execute the following command, replacing “you@youremailid.com” with your e-mail address.
# mail -s “Hello world” you@youremailid.com
Hit the return key and you will come to a new line. Enter the text “This is a test from my server”. Follow up the text by hitting the return key again. Then hit the key combination of Control+D to continue. The command prompt will ask you if you want to mark a copy of the mail to any other address, hit Control+D again. Check your mailbox. This command will send out a mail to the email id mentioned with the subject, “Hello world”.
To add content to the body of the mail while running the command you can use the following options. If you want to add text on your own:
# echo “This will go into the body of the mail.” | mail -s “Hello world” you@youremailid.com
And if you want mail to read the content from a file:
# mail -s “Hello world” you@youremailid.com < /home/calvin/application.log
Some other useful options in the mail command are:
-s subject (The subject of the mail)
-c email-address (Mark a copy to this “email-address”, or CC)
-b email-address (Mark a blind carbon copy to this “email-address”, or BCC)
Here’s how you might use these options:
# echo “Welcome to the world of Calvin n Hobbes” | mail -s “Hello world” calvin@cnh.com -c hobbes@cnh.com -b susie.derkins@cnh.com
MUTT
One of major drawbacks of using the mail command is that it does not support the sending of attachments. mutt, on the other hand, does support it. I’ve found this feature particularly useful for scripts that generate non-textual reports or backups which are relatively small in size which I’d like to backup elsewhere. Of course, mutt allows you to do a lot more than just send attachments. It is a much more complete command line mail client than the “mail” command. Right now we’ll just explore the basic stuff we might need often. Here’s how you would attach a file to a mail:
# echo “Sending an attachment.” | mutt -a backup.zip -s “attachment” calvin@cnh.com
This command will send a mail to calvin@cnh.com with the subject (-s) “attachment”, the body text “Sending an attachment.”, containing the attachment (-a) backup.zip. Like with the mail command you can use the “-c” option to mark a copy to another mail id.
Source From: http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/
adfasdasdMAIL
First run a quick test to make sure the “sendmail” application is installed and working correctly. Execute the following command, replacing “you@youremailid.com” with your e-mail address.# mail -s “Hello world” you@youremailid.com
Hit the return key and you will come to a new line. Enter the text “This is a test from my server”. Follow up the text by hitting the return key again. Then hit the key combination of Control+D to continue. The command prompt will ask you if you want to mark a copy of the mail to any other address, hit Control+D again. Check your mailbox. This command will send out a mail to the email id mentioned with the subject, “Hello world”.
To add content to the body of the mail while running the command you can use the following options. If you want to add text on your own:
# echo “This will go into the body of the mail.” | mail -s “Hello world” you@youremailid.com
And if you want mail to read the content from a file:
# mail -s “Hello world” you@youremailid.com < /home/calvin/application.log
Some other useful options in the mail command are:
-s subject (The subject of the mail)
-c email-address (Mark a copy to this “email-address”, or CC)
-b email-address (Mark a blind carbon copy to this “email-address”, or BCC)
Here’s how you might use these options:
# echo “Welcome to the world of Calvin n Hobbes” | mail -s “Hello world” calvin@cnh.com -c hobbes@cnh.com -b susie.derkins@cnh.com
MUTT
One of major drawbacks of using the mail command is that it does not support the sending of attachments. mutt, on the other hand, does support it. I’ve found this feature particularly useful for scripts that generate non-textual reports or backups which are relatively small in size which I’d like to backup elsewhere. Of course, mutt allows you to do a lot more than just send attachments. It is a much more complete command line mail client than the “mail” command. Right now we’ll just explore the basic stuff we might need often. Here’s how you would attach a file to a mail:# echo “Sending an attachment.” | mutt -a backup.zip -s “attachment” calvin@cnh.com
This command will send a mail to calvin@cnh.com with the subject (-s) “attachment”, the body text “Sending an attachment.”, containing the attachment (-a) backup.zip. Like with the mail command you can use the “-c” option to mark a copy to another mail id.
Read more at http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/#ZW60emwX4KkihuKF.99MAIL
First run a quick test to make sure the “sendmail” application is installed and working correctly. Execute the following command, replacing “you@youremailid.com” with your e-mail address.# mail -s “Hello world” you@youremailid.com
Hit the return key and you will come to a new line. Enter the text “This is a test from my server”. Follow up the text by hitting the return key again. Then hit the key combination of Control+D to continue. The command prompt will ask you if you want to mark a copy of the mail to any other address, hit Control+D again. Check your mailbox. This command will send out a mail to the email id mentioned with the subject, “Hello world”.
To add content to the body of the mail while running the command you can use the following options. If you want to add text on your own:
# echo “This will go into the body of the mail.” | mail -s “Hello world” you@youremailid.com
And if you want mail to read the content from a file:
# mail -s “Hello world” you@youremailid.com < /home/calvin/application.log
Some other useful options in the mail command are:
-s subject (The subject of the mail)
-c email-address (Mark a copy to this “email-address”, or CC)
-b email-address (Mark a blind carbon copy to this “email-address”, or BCC)
Here’s how you might use these options:
# echo “Welcome to the world of Calvin n Hobbes” | mail -s “Hello world” calvin@cnh.com -c hobbes@cnh.com -b susie.derkins@cnh.com
MUTT
One of major drawbacks of using the mail command is that it does not support the sending of attachments. mutt, on the other hand, does support it. I’ve found this feature particularly useful for scripts that generate non-textual reports or backups which are relatively small in size which I’d like to backup elsewhere. Of course, mutt allows you to do a lot more than just send attachments. It is a much more complete command line mail client than the “mail” command. Right now we’ll just explore the basic stuff we might need often. Here’s how you would attach a file to a mail:# echo “Sending an attachment.” | mutt -a backup.zip -s “attachment” calvin@cnh.com
This command will send a mail to calvin@cnh.com with the subject (-s) “attachment”, the body text “Sending an attachment.”, containing the attachment (-a) backup.zip. Like with the mail command you can use the “-c” option to mark a copy to another mail id.
Read more at http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/#ZW60emwX4KkihuKF.99MAIL
First run a quick test to make sure the “sendmail” application is installed and working correctly. Execute the following command, replacing “you@youremailid.com” with your e-mail address.# mail -s “Hello world” you@youremailid.com
Hit the return key and you will come to a new line. Enter the text “This is a test from my server”. Follow up the text by hitting the return key again. Then hit the key combination of Control+D to continue. The command prompt will ask you if you want to mark a copy of the mail to any other address, hit Control+D again. Check your mailbox. This command will send out a mail to the email id mentioned with the subject, “Hello world”.
To add content to the body of the mail while running the command you can use the following options. If you want to add text on your own:
# echo “This will go into the body of the mail.” | mail -s “Hello world” you@youremailid.com
And if you want mail to read the content from a file:
# mail -s “Hello world” you@youremailid.com < /home/calvin/application.log
Some other useful options in the mail command are:
-s subject (The subject of the mail)
-c email-address (Mark a copy to this “email-address”, or CC)
-b email-address (Mark a blind carbon copy to this “email-address”, or BCC)
Here’s how you might use these options:
# echo “Welcome to the world of Calvin n Hobbes” | mail -s “Hello world” calvin@cnh.com -c hobbes@cnh.com -b susie.derkins@cnh.com
MUTT
One of major drawbacks of using the mail command is that it does not support the sending of attachments. mutt, on the other hand, does support it. I’ve found this feature particularly useful for scripts that generate non-textual reports or backups which are relatively small in size which I’d like to backup elsewhere. Of course, mutt allows you to do a lot more than just send attachments. It is a much more complete command line mail client than the “mail” command. Right now we’ll just explore the basic stuff we might need often. Here’s how you would attach a file to a mail:# echo “Sending an attachment.” | mutt -a backup.zip -s “attachment” calvin@cnh.com
This command will send a mail to calvin@cnh.com with the subject (-s) “attachment”, the body text “Sending an attachment.”, containing the attachment (-a) backup.zip. Like with the mail command you can use the “-c” option to mark a copy to another mail id.
Read more at http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/#ZW60emwX4KkihuKF.99
No comments:
Post a Comment